Dishwasher racks are prone to rust. Especially if they are not properly maintained. The rusting will not only affect the performance of the dishwasher, but it will also cost you more than your expectations. So, whether you use the dishwasher occasionally, or use it too often for cleaning up the dishes in a jiffy, we will suggest you to keep good care of the dishwasher racks so that the appliance can serve you for years without any major performance issues.
In the article, we are going to talk about the simple yet useful ways that can help you avoid the rust formation in your dishwasher racks. So, spend a few minutes to the article and know these useful hacks to prevent your dishwasher racks from rusting. By spending a few minutes to the article, you can easily avoid the money that you would have invested in repairing the dishwasher from the authorized service center. So, let’s get started.
Preventing The Rust to Build
Prevention is always better than cure. So, let’s discuss it first. In this section, we are going to talk about the tips that can help you prevent rusting. Go through them and avoid the rust as far as possible.
As we all know that there is a lot of water used in the dishwasher, and as the dishwasher racks are made of metal, they are prone to rust. No matter how carefully you use them, there is always a chance to get the rust on the racks. Though the manufacturers coat the racks with vinyl to provide them better resistance to the corrosion, if you are not carefully dealing with the racks, you can remove the vinyl coating from the racks. Here are a few important tips that can help you avoid the rust.
- Make sure that the dishwasher racks are clean and free from moisture after using it.
- If possible get rid of any water droplets using a soft kitchen towel
- Keep the dishwasher open for a few minutes after using
- Carefully load and unload the dishes
By keeping simple points in mind, you can easily keep the dishwasher in its top running condition. Try them and keep the rust away from the dishwasher.
Dealing with The Rust
In case, your dishwasher racks got the rust, instead of contacting the official service center or panicking, it is better to act smart and fast before the rust does any more damage to the dishwasher. Here are a few tips that you can try at home without making too much expense. Try them and save money.
As said, the companies usually use the vinyl coating on the racks that not only help them to repel water easily, but also make them rustproof. And the major reason for rusting is the damaged vinyl coating that can be caused due to mishandling or any other reason.
Step 1: Locate the rust.
Step 2: Make sure that the dishwasher is clean and dry.
Step 3: If possible, take out the rack that has rust on it.
Step 4: Use the steel wool scrubber to scurb off the loose rust
Step 5: Once done, brush of the dust and get a recommended vinyl paint that goes perfectly well with your dishwasher’s paint.
Step 6: Make at least two coatings of the vinyl paint and leave it to dry for a day
Step 7: Make sure that the rack is dried completely before placing it in the dishwasher.
By following these simple steps, you can easily get rid of the rust and make sure that it won’t reappear soon. So, try these steps and keep good care of your dishwasher to avoid any consequences.
